LORE LAB Steel Test Database
23°

Best passing angle: the smallest micro-bevel angle that lasted 600 push cuts.

Based on 1 passing test with the angle recorded, out of 3 tests for this steel.
Few passing tests: this angle rests on 1 passing test, so treat it as a first reading until more tests pass.

The test behind this number

Brand / model
Spyderco / ENDURA
Secondary bevel
12° per side
Micro-bevel
23° per side (the best passing angle)
Hardness (HRC)
Not recorded
Wood
Spruce
Date
2024-12-10

Every test on one chart

Showing 2 of 3 tests. The other 1 have no recorded angle, so they are only in the table below.
Passed (600 cuts) Failed (placed at the cut where it failed)

Micro-bevel angle (degrees per side)

Swipe the chart sideways to see the full angle range.

By brand

Each brand’s best result for this steel. Heat treat differs by brand, so the best passing angle can differ too.

Spyderco
23° 3 tests

All tests

Every test for this steel, including heat damage, sorted by result and then angle. – means not recorded.

Notes
Passed 23° 12° 600 Spyderco / ENDURA – Spruce smooth-cut
Failed – – 72 Spyderco / ENDURA – Spruce
Failed 20° 15° 123 Spyderco / ENDURA – Spruce
23° Passed 600 cuts
Brand
Spyderco / ENDURA
Secondary bevel
12°
Hardness (HRC)
–
Notes
smooth-cut
– Failed 72 cuts
Brand
Spyderco / ENDURA
Secondary bevel
–
Hardness (HRC)
–
20° Failed 123 cuts
Brand
Spyderco / ENDURA
Secondary bevel
15°
Hardness (HRC)
–