LORE LAB Steel Test Database
18°

Best passing angle: the smallest micro-bevel angle that lasted 600 push cuts.

Based on 1 passing test with the angle recorded, out of 6 tests for this steel.
Few passing tests: this angle rests on 1 passing test, so treat it as a first reading until more tests pass.

The test behind this number

Brand / model
Spyderco / DELICA EMERSON
Secondary bevel
12° per side
Micro-bevel
18° per side (the best passing angle)
Hardness (HRC)
Not recorded
Wood
Spruce

Every test on one chart

Showing 1 of 6 tests. The other 5 have no recorded angle, so they are only in the table below.
Passed (600 cuts) Failed (placed at the cut where it failed)

Micro-bevel angle (degrees per side)

Swipe the chart sideways to see the full angle range.

By brand

Each brand’s best result for this steel. Heat treat differs by brand, so the best passing angle can differ too.

Civivi
No pass yet · best attempt 27 cuts 2 tests
Mcusta
No pass yet · best attempt 144 cuts 1 test
Spyderco
18° 3 tests

All tests

Every test for this steel, including heat damage, sorted by result and then angle. – means not recorded.

Notes
Passed 18° 12° 600 Spyderco / DELICA EMERSON – Spruce
Failed – – 144 Mcusta / SHINRA – Spruce
Failed – – 27 Civivi / AQUILA – Spruce
Failed – – 21 Civivi / AQUILA – Spruce
Failed – – 17 Spyderco / ENDURA 4 – Spruce
Failed – – 4 Spyderco / ENDURA 4 – Spruce
18° Passed 600 cuts
Brand
Spyderco / DELICA EMERSON
Secondary bevel
12°
Hardness (HRC)
–
– Failed 144 cuts
Brand
Mcusta / SHINRA
Secondary bevel
–
Hardness (HRC)
–
– Failed 27 cuts
Brand
Civivi / AQUILA
Secondary bevel
–
Hardness (HRC)
–
– Failed 21 cuts
Brand
Civivi / AQUILA
Secondary bevel
–
Hardness (HRC)
–
– Failed 17 cuts
Brand
Spyderco / ENDURA 4
Secondary bevel
–
Hardness (HRC)
–
– Failed 4 cuts
Brand
Spyderco / ENDURA 4
Secondary bevel
–
Hardness (HRC)
–

Also recorded as: VG10