15°
Best passing angle: the smallest micro-bevel angle that lasted 600 push cuts.
Based on 1 passing test
with the angle recorded, out of 5 tests for this steel.
Few passing tests: this angle rests on 1 passing test, so treat it as a first reading until more tests pass.
The test behind this number
- Brand / model
- Spyderco / Manix Lw
- Secondary bevel
- 12° per side
- Micro-bevel
- 15° per side (the best passing angle)
- Hardness (HRC)
- None
- Wood
- Spruce
- Date
- 2026-07-25
Every test on one chart
Showing 2 of 5 tests. The other 3 have no recorded angle, so they are only in the table below.
Passed (600 cuts)
Failed (placed at the cut where it failed)
By brand
Each brand’s best result for this steel. Heat treat differs by brand, so the best passing angle can differ too.
Spyderco
15°
5 tests
All tests
Every test for this steel, including heat damage, sorted by result and then angle. – means not recorded.
| Notes | |||||||
|---|---|---|---|---|---|---|---|
| Passed | 15° | 12° | 600 | Spyderco / Manix Lw | None | Spruce | |
| Failed | – | – | 143 | Spyderco / MANIX LW | – | Spruce | |
| Failed | – | – | 69 | Spyderco / MANIX LW | – | Spruce | |
| Failed | – | – | 27 | Spyderco / MANIX LW | – | Spruce | |
| Failed | 15° | 13° | 400 | Spyderco / MANIX LW | – | Spruce | apex-rounding |
15°
Passed
600 cuts
- Brand
- Spyderco / Manix Lw
- Secondary bevel
- 12°
- Hardness (HRC)
- None
–
Failed
143 cuts
- Brand
- Spyderco / MANIX LW
- Secondary bevel
- –
- Hardness (HRC)
- –
–
Failed
69 cuts
- Brand
- Spyderco / MANIX LW
- Secondary bevel
- –
- Hardness (HRC)
- –
–
Failed
27 cuts
- Brand
- Spyderco / MANIX LW
- Secondary bevel
- –
- Hardness (HRC)
- –
15°
Failed
400 cuts
- Brand
- Spyderco / MANIX LW
- Secondary bevel
- 13°
- Hardness (HRC)
- –
- Notes
- apex-rounding
Also recorded as: SPY-27