LORE LAB Steel Test Database
20°

Best passing angle: the smallest micro-bevel angle that lasted 600 push cuts.

Based on 1 passing test with the angle recorded, out of 6 tests for this steel.
Few passing tests: this angle rests on 1 passing test, so treat it as a first reading until more tests pass.

The test behind this number

Brand / model
Hogue / TEMPLAR
Secondary bevel
11° per side
Micro-bevel
20° per side (the best passing angle)
Hardness (HRC)
Not recorded
Wood
Spruce
Date
2023-10-08

Every test on one chart

Showing 1 of 6 tests. The other 5 have no recorded angle, so they are only in the table below.
Passed (600 cuts) Failed (placed at the cut where it failed)

Micro-bevel angle (degrees per side)

Swipe the chart sideways to see the full angle range.

By brand

Each brand’s best result for this steel. Heat treat differs by brand, so the best passing angle can differ too.

Bestech
No pass yet · best attempt 5 cuts 1 test
Civivi
No pass yet · best attempt 31 cuts 4 tests
Hogue
20° 1 test

All tests

Every test for this steel, including heat damage, sorted by result and then angle. – means not recorded.

Notes
Passed 20° 11° 600 Hogue / TEMPLAR – Spruce
Failed – – 31 Civivi / MCKENNA – Spruce
Failed – – 21 Civivi / MCKENNA – Spruce
Failed – – 20 Civivi / PLETHIROS – Spruce
Failed – – 5 Bestech / RIVERSTONE – Spruce
Failed – – 5 Civivi / PLETHIROS – Spruce
20° Passed 600 cuts
Brand
Hogue / TEMPLAR
Secondary bevel
11°
Hardness (HRC)
–
– Failed 31 cuts
Brand
Civivi / MCKENNA
Secondary bevel
–
Hardness (HRC)
–
– Failed 21 cuts
Brand
Civivi / MCKENNA
Secondary bevel
–
Hardness (HRC)
–
– Failed 20 cuts
Brand
Civivi / PLETHIROS
Secondary bevel
–
Hardness (HRC)
–
– Failed 5 cuts
Brand
Bestech / RIVERSTONE
Secondary bevel
–
Hardness (HRC)
–
– Failed 5 cuts
Brand
Civivi / PLETHIROS
Secondary bevel
–
Hardness (HRC)
–