15°
Best passing angle: the smallest micro-bevel angle that lasted 600 push cuts.
Based on 1 passing test
with the angle recorded, out of 3 tests for this steel.
Few passing tests: this angle rests on 1 passing test, so treat it as a first reading until more tests pass.
The test behind this number
- Brand / model
- DPx Gear / ?
- Secondary bevel
- 11° per side
- Micro-bevel
- 15° per side (the best passing angle)
- Hardness (HRC)
- Not recorded
- Wood
- Spruce
- Date
- 2023-12-05
Every test on one chart
Showing 1 of 3 tests. The other 2 have no recorded angle, so they are only in the table below.
Passed (600 cuts)
Failed (placed at the cut where it failed)
By brand
Each brand’s best result for this steel. Heat treat differs by brand, so the best passing angle can differ too.
DPx Gear
15°
1 test
Lionsteel
No pass yet · best attempt 30 cuts
2 tests
All tests
Every test for this steel, including heat damage, sorted by result and then angle. – means not recorded.
| Notes | |||||||
|---|---|---|---|---|---|---|---|
| Passed | 15° | 11° | 600 | DPx Gear / ? | – | Spruce | |
| Failed | – | – | 30 | Lionsteel / M5 | – | Spruce | |
| Failed | – | – | 17 | Lionsteel / M5 | – | Spruce |
15°
Passed
600 cuts
- Brand
- DPx Gear / ?
- Secondary bevel
- 11°
- Hardness (HRC)
- –
–
Failed
30 cuts
- Brand
- Lionsteel / M5
- Secondary bevel
- –
- Hardness (HRC)
- –
–
Failed
17 cuts
- Brand
- Lionsteel / M5
- Secondary bevel
- –
- Hardness (HRC)
- –