LORE LAB Steel Test Database
18°

Best passing angle: the smallest micro-bevel angle that lasted 600 push cuts.

Based on 1 passing test with the angle recorded, out of 3 tests for this steel.
Few passing tests: this angle rests on 1 passing test, so treat it as a first reading until more tests pass.

The test behind this number

Brand / model
Strider / .75AR
Secondary bevel
18° per side
Micro-bevel
18° per side (the best passing angle)
Hardness (HRC)
Not recorded
Wood
Spruce
Date
2023-11-09

Every test on one chart

3 tests, all shown
Passed (600 cuts) Failed (placed at the cut where it failed)

Micro-bevel angle (degrees per side)

Swipe the chart sideways to see the full angle range.

By brand

Each brand’s best result for this steel. Heat treat differs by brand, so the best passing angle can differ too.

Spyderco
No pass yet · best attempt 558 cuts 2 tests
Strider
18° 1 test

All tests

Every test for this steel, including heat damage, sorted by result and then angle. – means not recorded.

Notes
Passed 18° 18° 600 Strider / .75AR – Spruce
Failed 17° 12° 558 Spyderco / Para 2 – Spruce
Failed 20° 15° 218 Spyderco / PM2 – Spruce
18° Passed 600 cuts
Brand
Strider / .75AR
Secondary bevel
18°
Hardness (HRC)
–
17° Failed 558 cuts
Brand
Spyderco / Para 2
Secondary bevel
12°
Hardness (HRC)
–
20° Failed 218 cuts
Brand
Spyderco / PM2
Secondary bevel
15°
Hardness (HRC)
–