LORE LAB Steel Test Database
17°

Best passing angle: the smallest micro-bevel angle that lasted 600 push cuts.

Based on 3 passing tests with the angle recorded, out of 4 tests for this steel.

The test behind this number

Brand / model
Spyderco / Opus
Secondary bevel
12° per side
Micro-bevel
17° per side (the best passing angle)
Hardness (HRC)
None
Wood
Spruce
Date
2026-07-25

Every test on one chart

Showing 3 of 4 tests. The other 1 have no recorded angle, so they are only in the table below.
Passed (600 cuts) Failed (placed at the cut where it failed)

Micro-bevel angle (degrees per side)

Swipe the chart sideways to see the full angle range.

By brand

Each brand’s best result for this steel. Heat treat differs by brand, so the best passing angle can differ too.

Benchmade
25° 1 test
Spyderco
17° 3 tests

All tests

Every test for this steel, including heat damage, sorted by result and then angle. – means not recorded.

Notes
Passed 17° – 600 Spyderco / IKUCHI – Spruce
Passed 17° 12° 600 Spyderco / Opus None Spruce
Passed 25° – 600 Benchmade / FIXED CONTEGO – Spruce
Failed – – 100 Spyderco / OPUS – Spruce
17° Passed 600 cuts
Brand
Spyderco / IKUCHI
Secondary bevel
–
Hardness (HRC)
–
17° Passed 600 cuts
Brand
Spyderco / Opus
Secondary bevel
12°
Hardness (HRC)
None
25° Passed 600 cuts
Brand
Benchmade / FIXED CONTEGO
Secondary bevel
–
Hardness (HRC)
–
– Failed 100 cuts
Brand
Spyderco / OPUS
Secondary bevel
–
Hardness (HRC)
–