20°
Best passing angle: the smallest micro-bevel angle that lasted 600 push cuts.
Based on 1 passing test
with the angle recorded, out of 3 tests for this steel.
Few passing tests: this angle rests on 1 passing test, so treat it as a first reading until more tests pass.
The test behind this number
- Brand / model
- Spyderco / NATIVE CHEF
- Secondary bevel
- 11° per side
- Micro-bevel
- 20° per side (the best passing angle)
- Hardness (HRC)
- Not recorded
- Wood
- Spruce
Every test on one chart
Showing 1 of 3 tests. The other 2 have no recorded angle, so they are only in the table below.
Passed (600 cuts)
Failed (placed at the cut where it failed)
By brand
Each brand’s best result for this steel. Heat treat differs by brand, so the best passing angle can differ too.
Spyderco
20°
3 tests
All tests
Every test for this steel, including heat damage, sorted by result and then angle. – means not recorded.
| Notes | |||||||
|---|---|---|---|---|---|---|---|
| Passed | 20° | 11° | 600 | Spyderco / NATIVE CHEF | – | Spruce | |
| Failed | – | – | 62 | Spyderco / NATIVE CHEF | – | Spruce | |
| Failed | – | – | 14 | Spyderco / NATIVE CHEF | – | Spruce |
20°
Passed
600 cuts
- Brand
- Spyderco / NATIVE CHEF
- Secondary bevel
- 11°
- Hardness (HRC)
- –
–
Failed
62 cuts
- Brand
- Spyderco / NATIVE CHEF
- Secondary bevel
- –
- Hardness (HRC)
- –
–
Failed
14 cuts
- Brand
- Spyderco / NATIVE CHEF
- Secondary bevel
- –
- Hardness (HRC)
- –