LORE LAB Steel Test Database
15°

Best passing angle: the smallest micro-bevel angle that lasted 600 push cuts.

Based on 1 passing test with the angle recorded, out of 2 tests for this steel.
Few passing tests: this angle rests on 1 passing test, so treat it as a first reading until more tests pass.

The test behind this number

Brand / model
Bestech / VK-CORE
Secondary bevel
12° per side
Micro-bevel
15° per side (the best passing angle)
Hardness (HRC)
Not recorded
Wood
Spruce
Date
2024-02-06

Every test on one chart

2 tests, all shown
Passed (600 cuts) Failed (placed at the cut where it failed)

Micro-bevel angle (degrees per side)

Swipe the chart sideways to see the full angle range.

By brand

Each brand’s best result for this steel. Heat treat differs by brand, so the best passing angle can differ too.

Bestech
15° 1 test
Civivi
No pass yet · best attempt 70 cuts 1 test

All tests

Every test for this steel, including heat damage, sorted by result and then angle. – means not recorded.

Notes
Passed 15° 12° 600 Bestech / VK-CORE – Spruce
Failed 15° 10° 70 Civivi / BRAZEN – Spruce apex-failure
15° Passed 600 cuts
Brand
Bestech / VK-CORE
Secondary bevel
12°
Hardness (HRC)
–
15° Failed 70 cuts
Brand
Civivi / BRAZEN
Secondary bevel
10°
Hardness (HRC)
–
Notes
apex-failure