LORE LAB Steel Test Database
20°

Best passing angle: the smallest micro-bevel angle that lasted 600 push cuts.

Based on 1 passing test with the angle recorded, out of 4 tests for this steel.
Few passing tests: this angle rests on 1 passing test, so treat it as a first reading until more tests pass.

The test behind this number

Brand / model
Massdrop
Secondary bevel
13° per side
Micro-bevel
20° per side (the best passing angle)
Hardness (HRC)
Not recorded
Wood
Spruce

Every test on one chart

Showing 1 of 4 tests. The other 3 have no recorded angle, so they are only in the table below.
Passed (600 cuts) Failed (placed at the cut where it failed)

Micro-bevel angle (degrees per side)

Swipe the chart sideways to see the full angle range.

By brand

Each brand’s best result for this steel. Heat treat differs by brand, so the best passing angle can differ too.

Civivi
No pass yet · best attempt 154 cuts 3 tests
Massdrop
20° 1 test

All tests

Every test for this steel, including heat damage, sorted by result and then angle. – means not recorded.

Notes
Passed 20° 13° 600 Massdrop – Spruce
Failed – – 154 Civivi / IMPERIUM 59-61 Spruce
Failed – – 154 Civivi / IMPERIUM – Spruce
Failed – – 40 Civivi / SYNERGY – Spruce
20° Passed 600 cuts
Brand
Massdrop
Secondary bevel
13°
Hardness (HRC)
–
– Failed 154 cuts
Brand
Civivi / IMPERIUM
Secondary bevel
–
Hardness (HRC)
59-61
– Failed 154 cuts
Brand
Civivi / IMPERIUM
Secondary bevel
–
Hardness (HRC)
–
– Failed 40 cuts
Brand
Civivi / SYNERGY
Secondary bevel
–
Hardness (HRC)
–