LORE LAB Steel Test Database
20°

Best passing angle: the smallest micro-bevel angle that lasted 600 push cuts.

Based on 1 passing test with the angle recorded, out of 5 tests for this steel.
Few passing tests: this angle rests on 1 passing test, so treat it as a first reading until more tests pass.

The test behind this number

Brand / model
Spyderco / Dragonfly
Secondary bevel
10° per side
Micro-bevel
20° per side (the best passing angle)
Hardness (HRC)
Not recorded
Wood
Spruce
Date
2024-01-14

Every test on one chart

Showing 1 of 5 tests. The other 4 have no recorded angle, so they are only in the table below.
Passed (600 cuts) Failed (placed at the cut where it failed)

Micro-bevel angle (degrees per side)

Swipe the chart sideways to see the full angle range.

By brand

Each brand’s best result for this steel. Heat treat differs by brand, so the best passing angle can differ too.

Benchmade
No pass yet · best attempt 76 cuts 1 test
Extrema Ratio
No pass yet · best attempt 144 cuts 1 test
Fox Knives
No pass yet · best attempt 82 cuts 1 test
Real Steel
No pass yet · best attempt 145 cuts 1 test
Spyderco
20° 1 test

All tests

Every test for this steel, including heat damage, sorted by result and then angle. – means not recorded.

Notes
Passed 20° 10° 600 Spyderco / Dragonfly – Spruce
Failed – – 145 Real Steel / Megalodon – Spruce
Failed – – 144 Extrema Ratio / BF3 DARK – Spruce
Failed – – 82 Fox Knives / Aruru – Spruce
Failed – – 76 Benchmade / STRYKER TRIAGE – Spruce
20° Passed 600 cuts
Brand
Spyderco / Dragonfly
Secondary bevel
10°
Hardness (HRC)
–
– Failed 145 cuts
Brand
Real Steel / Megalodon
Secondary bevel
–
Hardness (HRC)
–
– Failed 144 cuts
Brand
Extrema Ratio / BF3 DARK
Secondary bevel
–
Hardness (HRC)
–
– Failed 82 cuts
Brand
Fox Knives / Aruru
Secondary bevel
–
Hardness (HRC)
–
– Failed 76 cuts
Brand
Benchmade / STRYKER TRIAGE
Secondary bevel
–
Hardness (HRC)
–