25°
Best passing angle: the smallest micro-bevel angle that lasted 600 push cuts.
Based on 1 passing test
with the angle recorded, out of 11 tests for this steel.
Few passing tests: this angle rests on 1 passing test, so treat it as a first reading until more tests pass.
The test behind this number
- Brand / model
- We Knife / 6xx
- Secondary bevel
- 10° per side
- Micro-bevel
- 25° per side (the best passing angle)
- Hardness (HRC)
- Not recorded
- Wood
- Spruce
- Date
- 2024-01-14
Every test on one chart
Showing 5 of 11 tests. The other 6 have no recorded angle, so they are only in the table below.
Passed (600 cuts)
Failed (placed at the cut where it failed)
By brand
Each brand’s best result for this steel. Heat treat differs by brand, so the best passing angle can differ too.
Maserin
No pass yet · best attempt 2 cuts
1 test
Maxace
No pass yet · best attempt 14 cuts
3 tests
MKM
No pass yet · best attempt 31 cuts
1 test
Real Steel
No pass yet · best attempt 20 cuts
1 test
Spyderco
No pass yet · best attempt 6 cuts
1 test
TRC
No pass yet · best attempt 24 cuts
2 tests
We Knife
25°
2 tests
All tests
Every test for this steel, including heat damage, sorted by result and then angle. – means not recorded.
| Notes | |||||||
|---|---|---|---|---|---|---|---|
| Passed | 25° | 10° | 600 | We Knife / 6xx | – | Spruce | |
| Failed | – | – | 20 | Real Steel / GARDARIK | – | Spruce | |
| Failed | – | – | 14 | Maxace / ZERG | – | Spruce | |
| Failed | – | – | 6 | Spyderco / MANIX | – | Spruce | |
| Failed | – | – | 3 | Maxace / ZERG | – | Spruce | |
| Failed | – | – | 3 | Maxace / ZERG | – | Spruce | |
| Failed | – | – | 2 | Maserin / ? | – | Spruce | |
| Failed | 20° | – | 31 | MKM / MAKRO | – | Spruce | |
| Failed | 20° | 20° | 24 | TRC / ? | – | Spruce | |
| Failed | 20° | 20° | 11 | TRC / ? | – | Spruce | |
| Failed | 23° | 13° | 43 | We Knife / FEROX | – | Spruce |
25°
Passed
600 cuts
- Brand
- We Knife / 6xx
- Secondary bevel
- 10°
- Hardness (HRC)
- –
–
Failed
20 cuts
- Brand
- Real Steel / GARDARIK
- Secondary bevel
- –
- Hardness (HRC)
- –
–
Failed
14 cuts
- Brand
- Maxace / ZERG
- Secondary bevel
- –
- Hardness (HRC)
- –
–
Failed
6 cuts
- Brand
- Spyderco / MANIX
- Secondary bevel
- –
- Hardness (HRC)
- –
–
Failed
3 cuts
- Brand
- Maxace / ZERG
- Secondary bevel
- –
- Hardness (HRC)
- –
–
Failed
3 cuts
- Brand
- Maxace / ZERG
- Secondary bevel
- –
- Hardness (HRC)
- –
–
Failed
2 cuts
- Brand
- Maserin / ?
- Secondary bevel
- –
- Hardness (HRC)
- –
20°
Failed
31 cuts
- Brand
- MKM / MAKRO
- Secondary bevel
- –
- Hardness (HRC)
- –
20°
Failed
24 cuts
- Brand
- TRC / ?
- Secondary bevel
- 20°
- Hardness (HRC)
- –
20°
Failed
11 cuts
- Brand
- TRC / ?
- Secondary bevel
- 20°
- Hardness (HRC)
- –
23°
Failed
43 cuts
- Brand
- We Knife / FEROX
- Secondary bevel
- 13°
- Hardness (HRC)
- –