LORE LAB Steel Test Database
15°

Best passing angle: the smallest micro-bevel angle that lasted 600 push cuts.

Based on 3 passing tests with the angle recorded, out of 7 tests for this steel.

The test behind this number

Brand / model
Spyderco / PM2
Secondary bevel
11° per side
Micro-bevel
15° per side (the best passing angle)
Hardness (HRC)
Not recorded
Wood
Spruce
Date
2023-12-05

Every test on one chart

Showing 4 of 7 tests. The other 3 have no recorded angle, so they are only in the table below.
Passed (600 cuts) Failed (placed at the cut where it failed)

Micro-bevel angle (degrees per side)

Swipe the chart sideways to see the full angle range.

By brand

Each brand’s best result for this steel. Heat treat differs by brand, so the best passing angle can differ too.

Spyderco
15° 7 tests

All tests

Every test for this steel, including heat damage, sorted by result and then angle. – means not recorded.

Notes
Passed 15° 11° 600 Spyderco / PM2 – Spruce
Passed 15° 11° 600 Spyderco / PARA2 – Spruce
Passed 20° 11° 600 Spyderco / PM2 – Spruce
Failed – – 114 Spyderco / PM2 – Spruce
Failed – – 12 Spyderco / SHAMAN – Spruce
Failed – – 4 Spyderco / PARA2 – Spruce
Failed 14° 11° 47 Spyderco / PM2 – Spruce
15° Passed 600 cuts
Brand
Spyderco / PM2
Secondary bevel
11°
Hardness (HRC)
–
15° Passed 600 cuts
Brand
Spyderco / PARA2
Secondary bevel
11°
Hardness (HRC)
–
20° Passed 600 cuts
Brand
Spyderco / PM2
Secondary bevel
11°
Hardness (HRC)
–
– Failed 114 cuts
Brand
Spyderco / PM2
Secondary bevel
–
Hardness (HRC)
–
– Failed 12 cuts
Brand
Spyderco / SHAMAN
Secondary bevel
–
Hardness (HRC)
–
– Failed 4 cuts
Brand
Spyderco / PARA2
Secondary bevel
–
Hardness (HRC)
–
14° Failed 47 cuts
Brand
Spyderco / PM2
Secondary bevel
11°
Hardness (HRC)
–