LORE LAB Steel Test Database
15°

Best passing angle: the smallest micro-bevel angle that lasted 600 push cuts.

Based on 1 passing test with the angle recorded, out of 3 tests for this steel.
Few passing tests: this angle rests on 1 passing test, so treat it as a first reading until more tests pass.

The test behind this number

Brand / model
Hogue
Secondary bevel
10.5° per side
Micro-bevel
15° per side (the best passing angle)
Hardness (HRC)
Not recorded
Wood
Spruce
Date
2024-02-07

Every test on one chart

Showing 2 of 3 tests. The other 1 have no recorded angle, so they are only in the table below.
Passed (600 cuts) Failed (placed at the cut where it failed)

Micro-bevel angle (degrees per side)

Swipe the chart sideways to see the full angle range.

By brand

Each brand’s best result for this steel. Heat treat differs by brand, so the best passing angle can differ too.

Hogue
15° 1 test
Kershaw
No pass yet · best attempt 431 cuts 2 tests

All tests

Every test for this steel, including heat damage, sorted by result and then angle. – means not recorded.

Notes
Passed 15° 10.5° 600 Hogue – Spruce
Failed – – 12 Kershaw / LAUNCH 5 – Spruce
Failed 18° 13° 431 Kershaw / LAUNCH 5 – Spruce
15° Passed 600 cuts
Brand
Hogue
Secondary bevel
10.5°
Hardness (HRC)
–
– Failed 12 cuts
Brand
Kershaw / LAUNCH 5
Secondary bevel
–
Hardness (HRC)
–
18° Failed 431 cuts
Brand
Kershaw / LAUNCH 5
Secondary bevel
13°
Hardness (HRC)
–

Also recorded as: CPM 154, CPM154