LORE LAB Steel Test Database
25°

Best passing angle: the smallest micro-bevel angle that lasted 600 push cuts.

Based on 1 passing test with the angle recorded, out of 4 tests for this steel.
Few passing tests: this angle rests on 1 passing test, so treat it as a first reading until more tests pass.

The test behind this number

Brand / model
Maxace / KILLERWHALE
Secondary bevel
12° per side
Micro-bevel
25° per side (the best passing angle)
Hardness (HRC)
Not recorded
Wood
Spruce
Date
2024-02-07

Every test on one chart

Showing 2 of 4 tests. The other 2 have no recorded angle, so they are only in the table below.
Passed (600 cuts) Failed (placed at the cut where it failed)

Micro-bevel angle (degrees per side)

Swipe the chart sideways to see the full angle range.

By brand

Each brand’s best result for this steel. Heat treat differs by brand, so the best passing angle can differ too.

Maxace
25° 4 tests

All tests

Every test for this steel, including heat damage, sorted by result and then angle. – means not recorded.

Notes
Passed 25° 12° 600 Maxace / KILLERWHALE – Spruce
Failed – – 30 Maxace / KILLERWHALE – Spruce
Failed – – 17 Maxace / KILLERWHALE – Spruce
Failed 20° 11° 286 Maxace / KILLERWHALE – Spruce
25° Passed 600 cuts
Brand
Maxace / KILLERWHALE
Secondary bevel
12°
Hardness (HRC)
–
– Failed 30 cuts
Brand
Maxace / KILLERWHALE
Secondary bevel
–
Hardness (HRC)
–
– Failed 17 cuts
Brand
Maxace / KILLERWHALE
Secondary bevel
–
Hardness (HRC)
–
20° Failed 286 cuts
Brand
Maxace / KILLERWHALE
Secondary bevel
11°
Hardness (HRC)
–