LORE LAB Steel Test Database
No pass yet

No test of this steel has passed 600 cuts yet. The tests below show how close it has come.

1 test so far.

Every test on one chart

1 test, all shown
Passed (600 cuts) Failed (placed at the cut where it failed)

Micro-bevel angle (degrees per side)

Swipe the chart sideways to see the full angle range.

By brand

Each brand’s best result for this steel. Heat treat differs by brand, so the best passing angle can differ too.

Cold Steel
No pass yet · best attempt 24 cuts 1 test

All tests

Every test for this steel, including heat damage, sorted by result and then angle. – means not recorded.

Notes
Failed 24° 13° 24 Cold Steel / PILLAR – Spruce
24° Failed 24 cuts
Brand
Cold Steel / PILLAR
Secondary bevel
13°
Hardness (HRC)
–