20°
Best passing angle: the smallest micro-bevel angle that lasted 600 push cuts.
Based on 1 passing test
with the angle recorded, out of 4 tests for this steel.
Few passing tests: this angle rests on 1 passing test, so treat it as a first reading until more tests pass.
The test behind this number
- Brand / model
- Cold Steel / LINCHPIN
- Secondary bevel
- 10° per side
- Micro-bevel
- 20° per side (the best passing angle)
- Hardness (HRC)
- Not recorded
- Wood
- Spruce
- Date
- 2023-12-19
Every test on one chart
Showing 1 of 4 tests. The other 3 have no recorded angle, so they are only in the table below.
Passed (600 cuts)
Failed (placed at the cut where it failed)
By brand
Each brand’s best result for this steel. Heat treat differs by brand, so the best passing angle can differ too.
Cold Steel
20°
4 tests
All tests
Every test for this steel, including heat damage, sorted by result and then angle. – means not recorded.
| Notes | |||||||
|---|---|---|---|---|---|---|---|
| Passed | 20° | 10° | 600 | Cold Steel / LINCHPIN | – | Spruce | |
| Failed | – | 17° | 472 | Cold Steel / POCKET BUSHMAN | – | Spruce | |
| Failed | – | – | 283 | Cold Steel / LINCHPIN | – | Spruce | |
| Failed | – | – | 82 | Cold Steel / LINCHPIN | – | Spruce |
20°
Passed
600 cuts
- Brand
- Cold Steel / LINCHPIN
- Secondary bevel
- 10°
- Hardness (HRC)
- –
–
Failed
472 cuts
- Brand
- Cold Steel / POCKET BUSHMAN
- Secondary bevel
- 17°
- Hardness (HRC)
- –
–
Failed
283 cuts
- Brand
- Cold Steel / LINCHPIN
- Secondary bevel
- –
- Hardness (HRC)
- –
–
Failed
82 cuts
- Brand
- Cold Steel / LINCHPIN
- Secondary bevel
- –
- Hardness (HRC)
- –
Also recorded as: 1.4116, 4116