The Lab · Records
Every cut we have made.
All 3 of 3 tests, newest first. Filter by brand, steel, result or failure mode.
Failure mode
Clear all filters
| 2024-12-10 | Benchmade | TAGGEDOUT | MAGNACUT | 9.4° | 15° | 34 | 34 | CHIP, POSSIBLE HEAT DAMAGE |
| 2024-12-10 | Benchmade | ADIRA | MAGNACUT | 10° | 13° | 100 | 100 | CHIP |
| 2024-12-10 | IYK | FORMOSA | COROLESS | 9° | 15° | 163 | 163 | CHIPPING |
Push cuts on A-grade FAS spruce. 600 cuts is the pass cap; a lower figure is where the edge failed. Angles
are degrees per side. Secondary bevel is ours; micro-bevel is the measured apex. Blank HRC means the maker
did not state it, not zero.
MAGNACUT
15°
micro, 9.4° sec.
Benchmade · TAGGEDOUT
MAGNACUT
13°
micro, 10° sec.
Benchmade · ADIRA
COROLESS
15°
micro, 9° sec.
IYK · FORMOSA
Showing 3 of 3 · 3 tests. Newest first.